| Input voltage | 24 V DC |
| Nominal current | 1.2 A - 3.0 A |
| Opening angle | 122 |
| Max. Pull & Push Force | 300 N / 500 N / 800 N |
| Running speed | ca. 2 °/s |
| IP Code | IP54 |
| Switch on duration | 30 |
The Folding Arm² PA-KL²-T Door opener is an electromechanical actuator for opening doors for automated supply air for natural smoke extraction. The Folding Arm² Door Opener PA-KL²-T is used for the automated opening of doors of any kind. It is particularly suitable for self-closing doors that are used as air intake openings for smoke and heat dissipation in an emergency. In this case the body remains firmly connected to the door frame in its movement. Only the lever arm moves, which pushes the door open via a rolling mechanism. The roller is not directly connected to the door leaf. Thus, there are no restrictions for manual door opening in normal operation and as an escape route. The supply air doors are to be designed self-closing with an upper door closer.
The actuator PA-KL²-T can be used flexibly regarding the installation situation and direction of rotation. It is installed either at the frame or in the reveal, left and right side are possible. It is suitable for use on inward and outward closing elements. It is mounted at the secondary closing edge. Depending on the type of installation, opening widths of up to 122° are possible and, together with the extremely short opening time of less than 60 seconds, this guarantees rapid smoke extraction and ventilation in the event of fire. The targeted opening of doors to open the supply air simultaneously signals the ideal escape and rescue route. This can be combined with signal indicators and lights via a fire alarm system. The PA-KL²-T actuator is tested and certified according to DIN EN 12101-2. Actuators of the type Folding Arm² have a special kinematics and their high performance gear (> 20.000 LW) in combination with the stainless steel lever arm is very resistant. Especially the small installation dimensions make this automatic opener ideal for projects with high aesthetic demands - especially for large and heavy doors.
Easy handling through software interface
The connection is made via the SICO-PLUG connector plug. This contains the SICO BUS programming interface by which parameters such as opening stroke and force can be parameterized directly on site and further status messages can be read out.
The actuator also offers a potential-free contact for the end-positions OPEN or CLOSED.. Work sequence control and start-up delay are freely adjustable. Due to the freely adjustable start-up delay, the door opener folding arm is ideal for the automated opening of double leaf doors (secondary sash application). The PA-KL²-T door opener actuator can also be used in combination with electric openers and electric closer / motor lock which are installed in the door.
Attention: For simultaneous use of an electric opener or electric closer and the feedback contact, the wired variant EA-KL²-T-xxx-DC is required.
Your advantages at a glance:
| Matchcode | PA-KL2-T |
| Product name | Folding Arm² PA-KL²-T door opener |
| Features | 3 Years warranty SICO SHEV VENT Input 24 VDC N-SHEV approved |
| Input voltage | 24 V DC |
| Nominal current | 1.2 A - 3.0 A |
| Input voltage range | - 15 % / + 25 % |
| Ripple | 500 |
| Opening angle | 122 |
| Max. Pull & Push Force | 300 N / 500 N / 800 N |
| Classification | EN 12101-2, EN 60335-1, EN 60335-2-103 |
| Cut-Off | Integrated overlaod cut-off with microprocessor |
| Running speed | ca. 2 °/s |
| IP Code | IP54 |
| Switch on duration | 30 |
| Environment temperature range | 0 °C - +75 °C |
| Weight | approx. 5 kg |
| Mounting way | fitted |
| Housing | Aluminium housing E6 / EV1 anodized |
| Connections | SICO PLUG connection. Excluding connection cable / set. |
| PA-KL²T (with SICO-Plug) Door opener standard version with SICO Plug | ||
| Part no. | Matchcode | |
|---|---|---|
| M2 2020 | PA-KL²-T-30/122deg | |
| M2 2021 | PA-KL²-T-50/122deg | |
| M2 2022 | PA-KL²-T-80/122deg | |
| M2 2023 | PA-KL²-T-K-50/122deg | |
| EA-KL²-T-DC (line connected) Line-bound variant with additional relay, e.g. for simultaneous use of e-detector and feedback contact | ||
| Part no. | Matchcode | |
|---|---|---|
| M2 1519 | EA-KL²-T-30-DC | |
| M2 1520 | EA-KL²-T-K-50-DC | |
| M2 1523 | EA-KL²-T-50-DC | |
 Brochure EA-KL2-T_Antriebsbroschuere | Chain actuator brochure for folding arm EA-KL2-T |
| Brochure PA-KL²-T Door Opener | Brochure PA-KL²-T Door Opener |
| Brochure Window Automation | Brochure Window Automation |
| Brochure_EA-KL2 | Brochure for folding arm EA-KL2 |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| PRO_EA-KL2-T_EN.pdf | Brochure for folding door opener EA-KL2-T (English) |
| Short brochure PA- Folding Arm² | Short brochure for the Folding Arm² PA-KL², PA-KL²-T door opener and PA-KL²-DF rotary wing actuator, incl. SICO |
| Operating manual EA-KL2-T | Operating manual for folding arm EA-KL2-T for automatic opening doors |
| Operating manual PA-KL²-T | Operating manual for folding arm PA-KL2-T for opening doors |
| Certificate actuators | CE Declaration of conformity for Folding arm², chain, linear and slit actuators |
| Certificate EA-KL2-T folding arm door opener | Declaration of conformity for the folding arm EA-KL2-T for opening doors |
| Certificate EN 60335 | EN 60335-1:2012/A11:2014 EN 60335-2-103:2015 |
| Certificate PA-KL2 | Declaration of conformity for folding arm PA-KL2-T for opening doors |
| Certificate UKCA_PA-KL²_PA-KL²-T_PA-KL²-DF | Declaration of conformity for folding arm actuator PA-KL², PA-KL²-T, PA-KL²-DF |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
