The glass louvre system TG-24-RWA offers architects or facade planners an extensive scope of design. Therefore it is frequently applied in combination with smoke exhausting concepts and due to its large ventilation cross sections it is not only an ideal solution for smoke and heat exhaust vent openings but also for inlet air systems.
The glass louvre system, type TG-24-RWA is a smoke and heat ventilation device tested according to EN 12101-2. With regard to temperature resistance, permanent load, aerodynamic efficiency and further test criteria such as wind load resistance, the glass louvre system offers a maximum of safety. Of course, in addition to the SHEV function, the glass louvre system can also be used for ventilation purposes.
An electromechanical slit actuator type EA-L/S-1000/48 manufactured by SIMON PROtec and specially adapted to the lamella system is used as motor.
Technical data
Glass louvre window type TG-24-RWA for smoke and heat exhaust ventilation (SHEV)
Type: Thermical broken aluminium profiles
Drainage: Over 7° outside tilt profile
Surface: Anodized (or optional RAL coating)
Connecting parts and joints: High-grade steel, concealed bars
Frame: debth 66,4 mm
Static profile: With two isolating bars
Glazing: ISO Glass 24 mm (2 x Float 4 mm, 16 mm LZR)
Louvres: Centre pivot
Insulation: value 2,1 W/m²K
Heat protection: K - value 1.1
Heat resistance: B 300, up to 300° C (SHEV operation)*
Environmental temperature: T(-15), up to -15° C (SHEV operation)*
Wind load: WL A, 4.500 Pa*
Reliability: RE 1000, 10.000 (ventilation) + 1.000 (SHEV) load alternations*
* Classification and test criteria according to DIN EN 12101-2
Note: The louvre window TG-24-RWA is only qualified for vertical installation.
| Matchcode | Louvre window TG-24-SHEV |
| Article name | Louvre window TG-24-SHEV |
| Part number | RWG 50110 |
| Part no. | Matchcode | |
|---|---|---|
| M2 1740 | EA-L/S-1000/48-02 |
The glass louvre system, type TG-24-RWA is a smoke and heat ventilation device tested according to EN 12101-2. With regard to temperature resistance, permanent load, aerodynamic efficiency and further test criteria such as wind load resistance, the glass louvre system offers a maximum of safety. Of course, in addition to the SHEV function, the glass louvre system can also be used for ventilation purposes.
An electromechanical slit actuator type EA-L/S-1000/48 manufactured by SIMON PROtec and specially adapted to the lamella system is used as motor.
Technical data
Glass louvre window type TG-24-RWA for smoke and heat exhaust ventilation (SHEV)
Type: Thermical broken aluminium profiles
Drainage: Over 7° outside tilt profile
Surface: Anodized (or optional RAL coating)
Connecting parts and joints: High-grade steel, concealed bars
Frame: debth 66,4 mm
Static profile: With two isolating bars
Glazing: ISO Glass 24 mm (2 x Float 4 mm, 16 mm LZR)
Louvres: Centre pivot
Insulation: value 2,1 W/m²K
Heat protection: K - value 1.1
Heat resistance: B 300, up to 300° C (SHEV operation)*
Environmental temperature: T(-15), up to -15° C (SHEV operation)*
Wind load: WL A, 4.500 Pa*
Reliability: RE 1000, 10.000 (ventilation) + 1.000 (SHEV) load alternations*
* Classification and test criteria according to DIN EN 12101-2
Note: The louvre window TG-24-RWA is only qualified for vertical installation.
 Brochure Window Automation | Brochure Window Automation |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| Product information EA-LS-1000-48-02 | Product information for the slit actuator EA-LS-1000-48-02 for the louvre element TG-24 |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
