Part number | M2 5318 DA |
Input voltage | 24 V DC |
Nominal current | 1.0 |
Running speed | 9.7 |
IP code | IP32 |
Switch on duration | 30 |
The chain actuator EA-K-30/1000-T-DA is an electromechanical actuator for opening and closing windows and flaps. It is used for smoke and heat ventilation and natural ventilation. The motor can be mounted on any window profile or frame by using different mounting brackets. All EA-K-30 chain actuators are equipped with a back-rigid chain.
With a push and pull force of 300 N the actuator can meet all requirements in residential and commercial applications. The chain actuator is equipped with a stroke of 1000 mm, a soft start and a soft close range. The Soft-Close provides a reduced speed in the CLOSE direction, 75 mm before the end position, as well as less force to relieve the seal.
Modern design for high-quality architecture
With its compact and optically appealing design in an anodized aluminum housing, the EA-K-30 chain actuator is ideal for demanding objects in residential and commercial areas. The chain actuator can be used for the automation of inward and outward opening windows, flaps and swing sashes. The actuator is especially suited for small and light sashes. The installation is possible at main closing edges. Even as tandem version the actuator is hardly noticeable. Due to the flexible bracket system, many different installation variants are possible. (Brackets are not included.)
More power with DUO operation (parallel connection) and tandem
The chain actuator EA-K-30/1000-T-DA can be connected on both sides (motor side and chain bearing side). The actuator can thus be used in DUO operation, at the same time the tandem function is supported. A maximum of 2 actuators can be operated in parallel in DUO mode (via connecting cable) with connected tandem. If one actuator stops due to overload in tandem operation, the parallel connected actuator is also stopped after a previously defined (overrun) time.
Fast parameterization via SIMON LINK software interface
Equipped with the latest microprocessor technology, the EA-K-30 can be parameterized quickly and on site via the SIMON LINK software interface. Settings such as stroke shortening and force adjustment are possible, as well as maintenance and evaluation of the running cycles.
The chain actuator at a glance:
Matchcode | EA-K-30/1000-T-DA |
Article name | Chain actuator EA-K-30/1000-T-DA |
Part number | M2 5318 DA |
Input voltage | 24 V DC |
Nominal current | 1.0 |
Input voltage range | - 15 % / + 15 % |
Stroke | 1000 |
Push force | 300 |
Pull force | 300 |
Nominal locking force | < 3000 N |
Cut-Off | Integrated electronic overload cut-off |
Running speed | 9.7 |
IP code | IP32 |
Switch on duration | 30 |
Mounting way | attached |
Weight | 2.02 |
Housing | Aluminium profile housing EV1 anodized |
Housing type | Aluminium |
Colour | On request |
Housing length | 764 |
Housing width | 37 |
Housing height | 35 |
Appliance class | III |
Connection cable | Silicone connection cable 5 x 0,75 mm², not fixed with connector plug (length 3.000 mm) |
Nominal working temperature | 20 |
Environment temperature range | -5 °C - 75 °C |
Brackets included | no |
Part no. | Matchcode | |
---|---|---|
K2 5089 | K-K50-OK | |
K2 5097 | K-K30-A | |
K2 5098 | K-K30-K | |
K2 5104 | K-K30-FLEX | |
K2 5105 | K-K30-AKI | |
K2 5106 | K-K-OK-SK | |
K2 5107 | K-K30-ZB | |
K2 5108 | K-K30-AKI-R |
Chain actuator EA-K-30/1000-T-DA
24 V DC / 1 A / 300 N / 1000 mm stroke / tandem actuator, DUO operation
Chain actuator for SHEV and controlled natural ventilation applications.
Flexible installation at main closing edges.
Suitable for frame and sash mounting on inward and outward opening sashes/flaps in the facade.
With integrated microprocessor-controlled cut-off technology, programmable via the SIMON LINK software interface.
Technical data:
Rated voltage: 24 V DC (- 15% / + 15%)
Rated current: 1 A
Switch-on duration: ED 30% (ON: 3 min / OFF: 7 min)
Push force: 300 N
Pulling force: 300 N
Nominal locking force: ≤ 1000 N
Stroke length: 1000 mm
Running speed: 9.7 mm/s
Protection class: IP32
Temperature range: -5°C - 75°C
Housing: Anodized EV1 aluminum profile housing
Connection cable: silicone connection cable 5 x 0.75 mm² (length 3,000 mm)
Plug connection on both sides (motor side and chain bearing side)
Cut-off: Integrated load cut-off with microprocessor
Dimensions (LxWxH): 764 x 37 x 35 mm
Weight: 2.02 kg
No brackets included
Options:
- Coating according to RAL or DB
Manufacturer:
SIMON PROtec Systems GmbH
Type: Chain actuator EA-K-30/1000-T-DA
Article number: M2 5318 DA
Brochure Window Automation | Brochure Window Automation |
Brochure_EA-K-30_chain brochure | Brochure for chain actuator EA-K-30 |
Brochure_EA-K-50-30 | Brochure for chain actuators EA-K-30 / EA-K-50 / EA-KN-20-XS |
Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
Operating manual_EA(230)-K-30 | Operating manual for chain actuator EA-K-30/xxx-T and EA-K-30/xxx-T-DA / EA230-K-30/xxx and EA230-K-30/xxx-S |
Quick Guide EA-K-30 | Quick Guide Chain Actuator EA-K-30 (English) |
K-30 - Secondary closing edge mounting | Drawbridge - additional bracket for chain actuator K-30 for mounting on the secondary closing edge |
technical details_K-K30-FLEX_10 | Technical details for chain actuator K-K30-FLEX, Flex bracket bottom hung wing |
CAD drawing EA(230)-K-30 | CAD drawing for chain actuator EA(230)-K-30 |
CAD drawing EA(230)-K-30 | CAD drawing for chain actuator EA(230)-K-30 |
Certificate actuators | CE Declaration of conformity for Folding arm², chain, linear and slit actuators |
Certificate UKCA_EA-K-30_EA230-K-30 | Declaration of conformity for chain actuator EA-K-30, EA230-K-30 |
Certificate_EA-K-30_DE-EN-FR_2016 | Certificate for chain actuators EA-K-30 and EA230-K-30 |
Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
Safety instructions and warranty conditions | Safety instructions and warranty conditions |