| Part number | M2 2203 S |
| Input voltage | 24 V DC |
| Nominal current | 1.0 |
| Running speed | 10.5 |
| IP code | IP32 |
| Switch on duration | 30 |
Product Information / Datasheet (PDF)
PA-K-20 chain actuator - the compact alternative
The PA-K-20/600-S is an electromechanical chain actuator for opening and closing windows and flaps. The actuator impresses with its small footprint and visually appealing design. By using different bracket sets (not included in the scope of delivery), the actuator can be mounted on any window profile or frame. Installation is possible on the main closing edges of inward and outward opening windows. Thanks to its soft start and soft close range, the PA-K-20 is practically silent in everyday use.
Parameterisation and synchronisation easier than ever - thanks to SICO BUS technology
The actuator is connected via the SICO-PLUG connector. This contains the SICO BUS programming interface, which can be used to parameterise e.g. opening stroke and force, and read out status messages using SICO LINK Software.
With the synchronous operation mode, up to four actuators can be combined in a group. SICO BUS technology ensures synchronisation in real time. The actuator also provides a potential-free contact for forwarding signals to up to two subsequent locking actuators. All PA chain actuators are optionally available in the DA version, which permits connection from both sides.
Integrated installation on request
The PA-K-20 can be integrated into the window profile as the PA-KI-20 variant. Our sales team will be happy to advise you!
Performance features Chain actuator PA-K-20/600-S
The PA-K-20/600-S chain actuator is a synchro-capable actuator with integrated load cut-off. The chain actuator can be used to automate inward and outward-opening windows and flaps on the front. Installation is possible on main closing edges. With a pulling and pushing force of 200 N, the PA-K-20/600-S chain actuator opens and closes windows, doors and flaps for smoke extraction and ventilation. The opening stroke at nominal force is 600 mm in pull and 200 mm in push applications. If required, the stroke can easily be reduced using the SICO LINK software interface.
| Matchcode | PA-K-20/600-S |
| Article name | Chain actuator PA-K-20/600-S |
| Part number | M2 2203 S |
| Input voltage | 24 V DC |
| Nominal current | 1.0 |
| Input voltage range | - 15 % / + 15 % |
| Stroke | 600 |
| Push force | 200 |
| Pull force | 200 |
| Nominal locking force | ≤ 2000 |
| Cut-Off | Integrated electronic overload cut-off |
| Running speed | 10.5 |
| IP code | IP32 |
| Switch on duration | 30 |
| Mounting way | attached |
| Weight | 1.1 |
| Housing | Aluminium profile housing EV1 anodized |
| Housing type | Aluminium |
| Colour | On request |
| Housing length | 625 |
| Housing width | 39 |
| Housing height | 24 |
| Appliance class | III |
| Connection cable | SICO PLUG connection. Excluding connection cable / set. |
| Nominal working temperature | 20 |
| Environment temperature range | -5 °C - 75 °C |
| Brackets included | no |
| Customs tariff no | 84798997 |
Chain actuator PA-K-20/600-S
24 V DC / 0.9 A / 200 N / 600 mm stroke / synchronous operation actuator
Chain actuator for SHEV and controlled natural ventilation applications.
Flexible installation at main closing edges.
Suitable for frame and sash mounting on inward and outward opening sashes/flaps in the facade.
With integrated microprocessor-controlled cut-off technology, programmable via the SICO LINK software interface.
Technical data:
Rated voltage: 24 V DC (- 15% / + 25%)
Rated current: 0.9 A
Switch-on duration: ED 30% (ON: 3 min / OFF: 7 min)
Push force: 200 N
Pulling force: 200 N
Nominal locking force: ≤ 700 N
Stroke length: 600 mm
Running speed: 10.5 mm/s
Protection class: IP32
Temperature range: -5°C - 75°C
Housing: Anodized EV1 aluminum profile housing
Connection: SICO-PLUG (without connection cable / set)
Cut-off: Integrated load cut-off with microprocessor
Dimensions (LxWxH): 625 x 39 x 24 mm)
Weight: 1.1 kg
No brackets included
Options:
- Connecting cable/set
- Coating according to RAL or DB
- Synchro actuator
- Double connection
- Integrated version on request
Manufacturer:
SIMON PROtec Systems GmbH | Medienstraße 8 | D-94036 Passau
Type: Chain actuator PA-K-20/600-S
Article number: M2 2203 S
WEEE Reg. No.: DE 97535049
| Brochure Window Automation | Brochure Window Automation |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| BA_PA-K(I)-20-xxx_EN | Operating manual PA-K(I)-20 |
| Certificate actuators | CE Declaration of conformity for Folding arm², chain, linear and slit actuators |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
