The M-SHEV-12-RSV is a modular control panel that can be used for several curtain systems. Housed in a robust sheet steel housing, the control unit contains the power supply, emergency power supply and, together with the AM 830 switch-off, the entire control and regulation electronics for operating 24 V DC actuators for smoke and fire protection curtains. There is a connection for the manual control unit, smoke detector, fire alarm panel (with auto-reset option) and four potential-free changeover contacts. The control device is supplied including 10mm² connection terminals for the motor cable and a plastic cable flange plate. The M-SHEV-12-RSV modular control panel is CE certified according to DIN EN 12101-10.
Mains fluctuations and power failures can affect the reliable functioning of control units. The M-SHEV-12-RSV is designed to perform its tasks reliably even in the event of mains fluctuations and power failures. The emergency power supply lasts for 60 minutes.
The modular control panel consists of a total of four (optionally five) components: Power supply, motor relay MR120, sensor interface SI-100 and central interface ZI-100 (optional signalling interface). All modules are connected by a microcontroller via a digital BUS. The switching power supply unit converts the 230-volt output voltage into a stable 24-volt supply, while the central interface, sensor interface and motor relay ensure control and ventilation, connection of peripheral devices and supply of the connected actuators. The optional MI-100 signalling interface provides all necessary information about the peripheral devices.
Software interface SimonLink for intuitive operation
The M-SHEV modular control panel has a Simon Link software interface specially developed for it. Due to the user-friendly user interface, no special previous knowledge is required. Simply connect it and have all setting options transferred directly to the software.
Remote maintenance for fast on-site assistance
A further advantage: Remote maintenance is possible without any problems via the remote maintenance module (optional). The system status, e.g. status of the actuators, fault messages, alarm triggers, power failures, etc. can be queried via the Internet or a GPRS module. The setting of the control system is also possible via remote access.
| Matchcode | M-SHEV-12-RSV |
| Article name | Modular control panel M-SHEV-12-RSV |
| Part number | ST4 3423 |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 12 |
| LED signs | LEDs on the loading card: 1. green LED "AKKU" = OK (Akku exists and is loading) 2. green LED "NETZ" = mains operation further LEDs on the modules |
| IP code | IP54 |
| Mounting way | attached |
| Housing | steel case housing 400 x 600 x 200 mm |
| Housing type | |
| Colour | RAL 7035 light grey |
| Housing length | 400 |
| Housing width | 600 |
| Housing height | 250 |
| Appliance class | I |
| Environment temperature range | -5 °C bis 40 °C |
 Brochure Control Panels | Brochure Control Panels |
| Brochure M-SHEV control units | Brochure for the modular control panel M-SHEV |
| Brochure M-SHEV_EN | Brochure for the modular control panel M-SHEV (English) |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| Operating manual M-SHEV | Operating manual for the M-SHEV product family |
| CE-Certificate M-SHEV | Declaration of conformity for the modular control panels M-SHEV-10, M-SHEV-10-AP, M-SHEV-12, M-SHEV-12-AP, M-SHEV-12-AP-ECO, M-SHEV-24-AP-ECO, M-SHEV-24, M-SHEV-48, M-SHEV-XX (cascadable power supply EV-24 / 48 A) |
| Certifictate UKCA_M-SHEV | Declaration of conformity for smoke control panel M-SHEV |
| Declaration of performance for the power supply of the M-SHEV | Declaration of performance for the power supply of the M-SHEV (EV-12 / EV-24 / EV-48) |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
