| Part number | ST4 3439 |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 24 |
Product Information / Datasheet (PDF)
Fast, intuitive and remote-controlled: The M-SHEV-24 / 1-2-ECO is a module center where all modules are connected and controlled by a microcontroller via a digital BUS. Housed in a sturdy steel case housing, the control system includes not only the emergency power supply but also the power supply as well as the entire control and regulating electronics for the operation of 24 V DC normally closed units.
Power fluctuations and power failures can affect the reliable operation of controllers. The M-SHEV-24 / 1-2-ECO is designed to reliably perform its tasks even in the event of network fluctuations and outages for at least 72 hours. In the basic version, the module center consists of a total of four (optionally five) components: power supply, motor relay, sensor interface and central interface (optional signaling interface). The switching power supply converts the 230-volt output voltage into a stable 24-volt supply, while the central interface, sensor interface and motor relay ensure control and ventilation, the connection of peripheral devices and the supply of the connected actuators. The optional message interface provides all the necessary information about the peripheral devices.
The M-SHEV 24 / 1-2 eco offers the full functionality of the M-SHEV. It controls ventilation signals from fan buttons, wind and rain detectors, house-trigger buttons, smoke and thermal alarms, the FAS and three monitored detection zones. Only in the area of SIMON LINK there is a small change. Although SIMON LINK can be connected to read out status messages. But no changes can be made, i.e. the system is delivered frozen. This allows us to offer the controller at a much lower price.
The advantages at a glance:
| Matchcode | M-SHEV-24/1-2-ECO |
| Article name | Modular control panel M-SHEV-24 /1-2-ECO |
| Part number | ST4 3439 |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 24 |
| Classification | CE certified EN 12101-10, tested ISO 21927-9 |
| LED signs | LEDs on the loading card: 1. green LED "AKKU" = OK (Akku exists and is loading) 2. green LED "NETZ" = mains operation further LEDs on the modules |
| IP code | IP66 |
| Housing | Sheet steel case |
| Housing type | |
| Colour | RAL 7035 |
| Housing width | 500 |
| Housing height | 500 |
| Housing depth | 200 |
| Appliance class | I |
| Environment temperature range | -5°C - +40°C |
Modular control panel M-SHEV-24/1-2-ECO
230 V AC / 24 V DC / 24 A
The M-SHEV (Modular Smoke and Heat Exhaust Ventilation) modular control panel is an electrical control device in a sheet steel housing with power supply, emergency power supply and all control and regulation electronics for operating 24 V DC actuators for building openings, e.g. windows and smoke exhaust flaps. The M-SHEV modular control panel controls actuators both in case of fire and for daily ventilation. In the event of a power failure, the emergency power supply ensures the function of the SHEV system for at least 72 hours. The M-SHEV modular control panel provides all necessary connections for release devices (push buttons, smoke detector, fire alarm system). In addition, various components can be connected for daily ventilation applications, e.g. wind/rain detectors and vent buttons. The ventilation function is at the same time a daily function check of the SHEV system. The M-SHEV modular control panel is CE certified according to EN 12101-10.
Technical data:
Input voltage: 230 V AC
Output voltage: 24 V DC
Output current: 24 A
Monitoring: continuous and short-term operation
Protection class: IP66
Temperature range: -5°C - +40°C
Housing: Sheet steel case
Color: RAL 7035
Dimensions (WxHxD): 500 x 500 x 200 mm
Manufacturer:
SIMON PROtec Systems GmbH
Typ: Modular control panel M-SHEV-24/1-2-ECO
Article number: ST4 3439
| Brochure Control Panels | Brochure Control Panels |
| Brochure M-SHEV control units | Brochure for the modular control panel M-SHEV |
| Brochure M-SHEV_EN | Brochure for the modular control panel M-SHEV (English) |
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| Operating manual M-SHEV | Operating manual for the M-SHEV product family |
| CE-Certificate M-SHEV | Declaration of conformity for the modular control panels M-SHEV-10, M-SHEV-10-AP, M-SHEV-12, M-SHEV-12-AP, M-SHEV-12-AP-ECO, M-SHEV-24-AP-ECO, M-SHEV-24, M-SHEV-48, M-SHEV-XX (cascadable power supply EV-24 / 48 A) |
| Certifictate UKCA_M-SHEV | Declaration of conformity for smoke control panel M-SHEV |
| Declaration of performance for the power supply of the M-SHEV | Declaration of performance for the power supply of the M-SHEV (EV-12 / EV-24 / EV-48) |
| Declaration of performance for the power supply of the M-SHEV (UKCA) | UKCA declaration of performance for the power supply of the M-SHEV (EV-12 / EV-24 / EV-48) |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
