| Part number | ST4 4041 XL |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 10 |
Product Information / Datasheet (PDF)
The M-VENT-10-AP is a modular control device for ventilation. Electrically operated NC units in 24 V DC and 230 V AC can be connected to it. A flexible construction and control of the ventilation groups is also possible. For each ventilation group, modules are assigned that react to the inputs and outputs as well as to control commands. The power supply is ensured by a switching power supply.
Up to six free module entities (6 FME) can be additionally installed. In the "flat" design held, they allow a simple DIN rail mounting. In addition, peripheral devices and NC units can be connected via spring-cage terminals.
The M-VENT-10-AP consists of a basic unit of base modules that communicate with each other via an internal bus connection. This allows factory and customer-specific parameterization via SIMON LINK. The basic modules include the ZI-100 central interface, the MI-100 signaling interface, the MR-120-V motor relay and the BI-100-MB BUS interface. The corresponding software interface SIMON-LINK can be obtained from the manufacturer.
Your benefits at a glance:
| Matchcode | M-VENT-10-AP (6 FME) |
| Article name | Modular ventilation control unit M-VENT-10-AP |
| Part number | ST4 4041 XL |
| Input voltage | 230 V AC |
| Output voltage | 24 V DC |
| Output current | 10 |
| LED signs | white: WTS; yellow: failure; green: OK |
| IP code | IP20 |
| Weight | 9 |
| Housing | Sheet steel housing 400 x 516 x 155 mm (WxHxD), surface-mounting |
| Housing type | |
| Colour | RAL 9010 white |
| Housing width | 400 |
| Housing height | 516 |
| Housing depth | 155 |
| Environment temperature range | -5°C - +60°C |
Modular ventilation control M-VENT-10-AP (6 FME)
230 V AC / 24 V DC / 10 A
The M-VENT (Modular Ventilation) ventilation control panel is an electrical control device in a sheet steel housing with power supply and all control and regulation electronics for the operation of 24 V DC actuators for daily aeration and ventilation. Ventilation signals from ventilation buttons, wind / rain detectors and central ventilation commands (e.g. building management system) can be processed. The basic M-VENT control system consists of three different components (optionally up to five): power supply (switching power supply), central interface ZI-100, motor relay MR-120, message interface MI-100 (optional) and bus interface BI-100 (optional).
Technical data:
Input voltage: 230 V AC
Output voltage: 24 V DC
Output current: 10 A
Protection class: IP20
Temperature range: -5°C - +60°C
Housing: Sheet steel case, powder-coated
Color: RAL 9010
Dimensions (WxHxD): 400 x 516 x 155 mm
Weight: 9 kg
Manufacturer:
SIMON PROtec Systems GmbH
Typ: Modular ventilation control panel M-VENT-10-AP (6 FME)
Article number: ST4 4041 XL
| Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
| Control unit brochure M-VENT | Control unit brochure for the control unit brochure M-VENT |
| Operating manual M-VENT | Operating manual for the M-VENT product family |
| CE-Certificate M-VENT | Declaration of conformity for the the ventilation control unit -VENT(L)-5/M-VENT (-L)-10, M-VENT-20, M-VENT-24, M-VENT-48 und M-VENT-72 |
| Certifictate UKCA_M-VENT | Declaration of conformity for daily vent control panel M-VENT |
| Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
| Safety instructions and warranty conditions | Safety instructions and warranty conditions |
Neu: Online-Shop - 
