Part number | ST4 4045 |
Input voltage | 230 V AC |
Output voltage | 24 V DC |
Output current | 20 |
The M-VENT-20-S is a modular ventilation system. By an extension of the housing up to 22 free module units can additionally be installed. With the "standard" case size 400 x 600 x 200 mm, the controller can be extended with up to six module units. This guarantees a flexible application.
A flexible design and control of the ventilation groups is just as possible as the connection of electrical NC units in 24 V DC and 230 V AC. Each ventilation group is assigned modules, which then react to control commands and inputs and outputs. The ventilation control is supplied by a switched-mode power supply.
The ventilation control M-VENT-20-S consists of a basic unit of basic modules (central interface ZI-100, alarm interface MI-100, motor relay MR-120-V, BUS-Interface BI-100-MB). These modules communicate with each other using an internal bus connection. This allows factory and customer-specific parameterization via the SIMON LINK software interface. The corresponding software can be obtained from SIMON PROtec Systems.
All modules are the same size and designed in "flat" design. Due to this structure, a simple DIN rail mounting is possible.
Your benefits at a glance:
Matchcode | M-VENT-20-S |
Article name | Ventilation control unit M-VENT-20-S |
Part number | ST4 4045 |
Input voltage | 230 V AC |
Output voltage | 24 V DC |
Output current | 20 |
LED signs | white: WTS; yellow: failure; green: OK |
IP code | IP66 |
Weight | 12.5 |
Housing | Sheet steel housing 400 x 600 x 200 mm (WxHxD), integrated mounting |
Housing type | |
Colour | RAL 7035 |
Housing width | 400 |
Housing height | 600 |
Housing depth | 200 |
Environment temperature range | -5°C - +60°C |
Modular ventilation control M-VENT-20-S
230 V AC / 24 V DC / 20 A
The M-VENT (Modular Ventilation) ventilation control panel is an electrical control device in a sheet steel housing with power supply and all control and regulation electronics for the operation of 24 V DC actuators for daily aeration and ventilation. Ventilation signals from ventilation buttons, wind / rain detectors and central ventilation commands (e.g. building management system) can be processed. The basic M-VENT control system consists of three different components (optionally up to five): power supply (switching power supply), central interface ZI-100, motor relay MR-120, message interface MI-100 (optional) and bus interface BI-100 (optional).
Technical data:
Input voltage: 230 V AC
Output voltage: 24 V DC
Output current: 20 A
Protection class: IP66
Temperature range: -5°C - +60°C
Housing: Sheet steel case, powder-coated
Color: RAL 7035
Dimensions (WxHxD): 400 x 600 x 200 mm
Weight: 12.5 kg
Manufacturer:
SIMON PROtec Systems GmbH
Typ: Modular ventilation control panel M-VENT-20-S
Article number: ST4 4045
Catalogue (web) Smoke & Daily Vent | Catalogue (web) Smoke & Daily Vent |
Control unit brochure M-VENT | Control unit brochure for the control unit brochure M-VENT |
Operating manual M-VENT | Operating manual for the M-VENT product family |
CE-Certificate M-VENT | Declaration of conformity for the the ventilation control unit -VENT(L)-5/M-VENT (-L)-10, M-VENT-20, M-VENT-24, M-VENT-48 und M-VENT-72 |
Certifictate UKCA_M-VENT | Declaration of conformity for daily vent control panel M-VENT |
Environmental Product Declaration (EPD) | Environmental Product Declaration (EPD) |
Safety instructions and warranty conditions | Safety instructions and warranty conditions |